Lighting

Posted on by
Back to Lighting...

Are you sure you want to delete this?

Yes, all the existing ceiling fixtures were replaced with cool LED units. We did this as we wanted to make some high speed shots and there was just too little exposure from the existing tubes. There is one extra fixture immediately over the main action that doesn't appear in shot other than in reflection. I also had dimmer control over each lamps so I could vary the intensities as the camera angle changed. I used a little green gel on these ceiling fixtures and the surrounding tungsten lamps, about 16 x 1K Fresnel lamps, were gelled with 1/2 CTO and 013. There were no additional lights.

Back to Lighting...